Copper Brass Cleaners, Copper Brass Lubricants

Copper brass processing – General Chemical Corp. offers a complete line of Copper Brass Lubricants, vanishing lubricants & Copper Brass Cleaning Products. Our Copper brass lubricants have found worldwide acceptance for use in machining, stamping, drawing, cleaning and extruding aluminum. The Copper Brass Lubricants -machining fluids are emulsifiable oil concentrates which provides exceptional boundary, polar, and extreme pressure lubricity. Copper brass lubricants have a unique biocide package which results in long sump life and odor free operation. Our stamping and drawing products are used for light and heavy duty forming operations. Because of its superior lubricity parts are produced with excellent surface finish and accurate dimensional stability.

Our knowledge of appropriate chemistries and proper copper brass cleaning recommendations insure proper copper brass cleaner selection. More than 2 decades of experience in the copper brass cleaning of copper brass processing are an important part of General Chemical’s heritage. From spray, soak tank and ultrasonic copper brass cleaners will help improve productivity and efficiency in any cleaning operation.

They are used at low temperatures, are free rinsing and are used at low concentrations. Non emulsifying cleaners allow oil to be skimmed from the cleaner, this results in long cleaner use life, easier waste treatment and reduced costs. General Chemical has specialized in formulating vanishing lubricants. These products are used were minimal lubricity and no residual films are required. Are products are used on thin gauge ferrous and non ferrous metals. Typical applications for vanishing lubricants include blanking, drawing, roll forming and fin forming in radiator manufacturing.

Our Aluminum lubricants for stamping and drawing  are used for light and heavy duty forming operations. Because of its superior lubricity parts are produced with excellent surface finish and accurate dimensional stability.

ProductsCopper Brass Cleaners, Copper Brass Lubricants
Rolube 6001Rolling Mills, Extrusion, Stamping , Drawing Solvent: Soluble Oil Dilution : 5% to 30% w/water
GenLube_2240Fin Mills, Light processing Solvent: Vanishing Dilution : Use As Is

ROLUBE 6001:  A soluble oil concentrate used for light to medium duty forming and blanking operations on copper, brass and aluminum. It is also used for machining ferrous and non ferrous metals. Typical dilutions for stamping and blanking are 10% to 30% in water. For machining dilutions range from 2.5% to 10%.

GEN-LUBE 3010: Heavy-duty vanishing copper brass lubricant for fin forming machines, stamping and drawing headers tanks for aluminum radiators. Can be used for stamping, header and tank forming up to 14 gauge thickness. Also it is odor free.

ProductsCopper Brass Cleaners, Copper Brass Lubricants
Acidon 848Copper and copper alloy soak cleaner Solvent: Water based acidic Dilution : 10%-20% by volume w/water
Acidon 4201Copper and copper alloy pickling Solvent: Water based acidic Dilution : 10%-20% by volume w/water
Acidon 7461Copper alloy soak cleaner Solvent: Water based acidic Dilution : 10%-20% by volume w/water
Acidon 2820Copper alloy spray cleaner Solvent: Water based acidic Dilution : 5%-15% by volume w/water
Acidon 1250Heavy duty de-ruster for ferrous metals Solvent: Water based acidic Dilution : 5%-25% by volume w/water
CuBraClean_6160Additive for Sulphuric Acid Tank Solvent: Water Dilution : 5%-10% by volume to Sulphuric Acid Tank

ACIDON 848: Copper alloys two step cleaning system for Copper/Brass Headers, Tanks and other parts. It is a water-based system and does not stain or tarnish brass..

ACIDON 4201: Water based pickling system for Copper and Copper alloys. Removes oxides and Brightens Brass.

ALKINE 2590:  Alkaline water based heavy duty cleaner for Copper/Brass parts. Low foaming and free rinsing.

TEKEBRA 6241: Anti-staining agent to be added to rinse tank after cleaning with sulphuric acid and Gen Kleen 3650 for Copper

GEN POLISH 3000: – ( Metal Polish ) Gen Polish 3000 is a mild abrasive cleaner and metal polish developed to remove water stains and oxidation from ALL METAL surfaces and other unpainted surfaces with a minimal amount of rubbing. Gen Polish 3000 is safe to use on brass, copper, bronze, pewter, stainless steel, chrome, aluminum, ceramic tile, porcelain, and glass. Gen Polish 3000- metal polish cleans two ways: mechanically and chemically without the use of acids or other harsh chemicals. Unlike most metal polishes Gen Polish 3000-metal polish is not flammable. Gen Polish 3000 produces a high degree of brilliance on shinny surfaces and a rich glow on lustrous metals. It is completely harmless to your skin. Gen Polish 3000-metal polish leaves no residue or dust, and does not “rainbow” stainless steel.

Customer Comments :

I am looking into brass cleaning solutions for small brass (ASTM B36/B36M) components which are used in assembly operations in our plant. These components are inspected by cameras, and being able to clean them (remove tarnish) to a consistent (color) finish without etching the surfaces is very important to us. Although these components come to us clean, they may have a very small amount of cutting oil remaining from our supplier.

Some of our concerns include:

The effect of your products on zinc as we have other components that contain higher zinc content in our wash area
Disposal of spent cleaning solution.
Safety of using the chemicals – MSDS needed
We currently have a rotary tumbler, small ultrasonic cleaner and soaking equipment available. We do not currently use any of your products