FoundryGeneral® Green Sand Parting 102 is low viscosity parting designed for particularly for automatic high production molding machines.
Recommended Application
1 FoundryGeneral® Green Sand Parting 102 is used as received. Prior to application, patterns should be well cleaned of previous release agents and dirt through the use of a solvent.
2 A light film of FoundryGeneral® Green Sand Parting 102 should be applied by spraying a mist onto the pattern. Avoid using too much, as it will eventually lead to a sticky film.
3 Reapply as needed.
Benefits
• Inhibits corrosion of metal patterns
• Will not build up on metal patterns unless too much is used
• Will not attack the sand clay bond when used as recommended
• If sprayed every mold cycle, less parting is needed per mold
• High flash point hydrocarbon
Material Compatibility Avoid heat, sparks and open flames. Avoid strong oxidizing agents (i.e. bleach)
