CLEANING SYSTEM :
COPPER ALLOYS CLEANING SYSTEM

  • Cleans and brightens in one operation
  • Flux compatible
  • Non-tarnishing
  • No waste treatment problems

COMPARISON:

COMPARISON OF CURRENT SYSTEM VS. GENERAL CHEMICAL’S ACIDON 848

CLEANING:

CURRENT SYSTEMACIDON 848
Cleaning cycle requires 7 tanks 180° F soap cleaner180° F soap cleaner / 2 cold water rinses pre pickle / bright pickle / cold water rinse / 160° F rinse (rust inhibitor).Cleaning cycle requires 3 tanks-150° F ACIDON 848 / cold water rinse / 160° F water rinse (rust inhibitor).
Cleaning cycle takes 12 – 18 min.Cleaning cycle takes 5 – 6 min.

WASTE TREATMENT:

CURRENT SYSTEMACIDON 848
Use of Excessive number of chemicals and rinses. Increases waste water treatment and solid waste costs.No chelating agents. Reduces waste disposal costs.
Hydrogen Peroxide is a strong oxidizer resulting in: Isolated storage requirement Flammability Problems Fire Insurance cost.No oxidizing agent.

QUALITY:

CURRENT SYSTEMACIDON 848
It oxidizes solder when silver soldered parts are cleaned.Oxidation of solder is negligible when soldered parts are cleaned.
Excellent bright finish of brass. Clean and bright, not as gold color as hydrogen peroxide.

COST:

CURRENT SYSTEMACIDON 848
Use of Excessive number of chemicals and rinses. Increases waste water treatment and solid waste costs.No chelating agents. Reduces waste disposal costs.
It is expensive!ACIDON 848 is a DOLLARS & CENTS proposition!

ABOUT ACIDON 848 :
What Equipment is Recommended for Handling ACIDON 848?

ACIDON 848 ACIDON 848 ACIDON 848 ACIDON 848 ACIDON 848 ACIDON 848 ACIDON 848 ACIDON 848 ACIDON 848 should be used in Stainless Steel or Fiberglass Tanks that can be heated to 180° F (68° C). Usually your existing equipment will work well.

ACIDON 848 ACIDON 848 should be used in Stainless Steel or Fiberglass Tanks that can be heated to 180° F (68° C). Usually your existing equipment will work well.

ACIDON 848 ACIDON 848 should be used in Stainless Steel or Fiberglass Tanks that can be heated to 180° F (68° C). Usually your existing equipment will work well.

MECHANISM OF ACIDON 848 SYSTEM
ACIDON 848ACIDON 848ACIDON 848ACIDON 848ACIDON 848, when heated, causes a chemical reaction with copper salts and copper oxides, and dissolves them in solution. It disperses oils. ACIDON 848 is recommended to be used between 10% – 20% concentrate at 140° F to 180° F depending upon the amount of soil and oxides to be cleaned.

PRODUCT BACK-UP

ACIDON 848 quality is consistently maintained with our modern chemical laboratory. Our trained technical staff will be glad to assist in the application of ACIDON 848. General Chemical provides simple and effective quality control procedures to all our customers.
HANDLING AND STORAGE

Caution is recommended. STORE INSIDE. Do not freeze.
YOUR PARTNER IN PERFORMANCE